Hometech alfa 300i Sr27g i3-5005u nk53-ver02 ok ec
EC Firmware: Hometech alfa 300i Sr27g i3-5005u nk53-ver02 ok ec. PCB revision 0.2. Original file Hometech alfa 300i Sr27g i3-5005u nk53-ver02 ok ec.bin, BIN…
EditAefa does not host or provide downloads of this file. Download links open the matching file page on RM Schematics, where the original source is available.
Technical information
- Manufacturer
- unknown
- Device model
- unknown
- Board number
- unknown
- PCB revision
- 0.2
- Resource type
- EC firmware high confidenceInferred from: "EC/KBC" in the name, small image
- Original filename
- Hometech alfa 300i Sr27g i3-5005u nk53-ver02 ok ec.bin
- File format
- .bin · Raw binary image · application/octet-stream
- File size
- 128 KB (131,072 bytes)
- Source date
- 2025-01-28 23:01 UTC
- Source
- t.me/Satale_bios_esquemas_Laptop/45138 (Santale Bios_Esquemas Notebook-PC)
- Device type
- Laptop
What this resource appears to contain
A .bin file that appears to be embedded-controller (EC/KBC) firmware (revision 0.2). This description is derived from the file name and post caption; the file itself has not been opened or inspected.
- CPU I3-5005U
Raw flash image (full SPI dump, BIOS region or EC firmware). Opens with: SPI programmer software (CH341A, RT809H, XGecu) · UEFITool / Intel FIT for region inspection. Compare the file size with the capacity of the flash chip on your board before writing.
How to verify motherboard compatibility
- Read the board number printed on your PCB and compare it character by character — this resource does not state one, so compatibility cannot be confirmed from the catalogue. Where to find it.
- Check the board revision (this resource: 0.2).
- Confirm you need EC firmware, not the main BIOS, and compare the file size with your flash chip.
- Use the model name only as a cross-check: one commercial model is often built on several boards.
Before you flash
BIOS compatibility checklist
0 / 6 checkedThis checklist cannot independently certify that a file is compatible with your board. It reflects what the catalogue knows about the file, not a verification of its content. How to identify the correct BIOS file