ELEKTA 29 5800-A8M280-OP10-Ver 10.00 Firmware File
Firmware: ELEKTA 29 5800-A8M280-OP10-Ver 10.00. PCB revision 10.00. Original file ELEKTA 29 5800-A8M280-OP10-Ver 10.00.bin, BIN, 4 MB, 4 MB flash image.…
EditAefa does not host or provide downloads of this file. Download links open the matching file page on RM Schematics, where the original source is available.
Technical information
- Manufacturer
- unknown
- Device model
- unknown
- Board number
- unknown
- PCB revision
- 10.00
- Resource type
- Firmware high confidenceInferred from: raw .bin image with an exact flash-chip size
- Original filename
- ELEKTA 29 5800-A8M280-OP10-Ver 10.00.bin
- File format
- .bin · Raw binary image · application/octet-stream
- File size
- 4 MB (4,194,304 bytes)
- Source date
- 2020-05-19 11:48 UTC
- Source
- t.me/led_software/37464 (LCD LED Bin Files)
- Device type
- TV
What this resource appears to contain
A .bin file that appears to be device firmware or a memory dump (revision 10.00). Its size is exactly 4 MB, the capacity of a 32 Mbit flash chip. This description is derived from the file name and post caption; the file itself has not been opened or inspected.
Raw flash image (full SPI dump, BIOS region or EC firmware). Opens with: SPI programmer software (CH341A, RT809H, XGecu) · UEFITool / Intel FIT for region inspection. Compare the file size with the capacity of the flash chip on your board before writing.
How to verify motherboard compatibility
- Read the board number printed on your PCB and compare it character by character — this resource does not state one, so compatibility cannot be confirmed from the catalogue. Where to find it.
- Check the board revision (this resource: 10.00).
- Use the model name only as a cross-check: one commercial model is often built on several boards.