20260110 115015 SVOD4 patched BIOS File
BIOS: 20260110 115015 SVOD4 patched. Original file 20260110_115015_SVOD4_patched.bin, BIN, 16 MB, 16 MB flash image. Posted 12 Jan 2026 in Telegram @dtechbios.
EditAefa does not host or provide downloads of this file. Download links open the matching file page on RM Schematics, where the original source is available.
Technical information
- Manufacturer
- unknown
- Device model
- unknown
- Board number
- unknown
- PCB revision
- not stated
- Resource type
- BIOS high confidenceInferred from: raw .bin image with an exact flash-chip size
- Original filename
- 20260110_115015_SVOD4_patched.bin
- File format
- .bin · Raw binary image · application/octet-stream
- File size
- 16 MB (16,777,216 bytes)
- Source date
- 2026-01-12 16:21 UTC
- Source
- t.me/dtechbios/56458 (DTECH BIOS SOLUTION®)
- Device type
- Laptop
What this resource appears to contain
A .bin file that appears to be a BIOS / SPI flash image. Its size is exactly 16 MB, the capacity of a 128 Mbit flash chip. This description is derived from the file name and post caption; the file itself has not been opened or inspected.
Raw flash image (full SPI dump, BIOS region or EC firmware). Opens with: SPI programmer software (CH341A, RT809H, XGecu) · UEFITool / Intel FIT for region inspection. Compare the file size with the capacity of the flash chip on your board before writing.
What the uploader says
- The uploader states that a password or lock was removed.
Flash the patched system BIOS and boot the laptop Step 3: Press ENTER or F1 to enter BIOS Settings Step 4: Enter any character when asked for Supervisor Password Step 5: Press ENTER when it shows Hardware ID Step 6: Press SPACEBAR 2x when asked Step 7: Turn OFF machine Step 8: FLASH the BACKUP System BIOS Step 9: Reset BIOS settings to factory default
Quoted from the original post (links and promotion removed). These statements have not been verified by EditAefa.
How to verify motherboard compatibility
- Read the board number printed on your PCB and compare it character by character — this resource does not state one, so compatibility cannot be confirmed from the catalogue. Where to find it.
- Check the board revision (not stated for this resource).
- Confirm you need the main BIOS image, not EC firmware, and compare the file size with your flash chip.
- Use the model name only as a cross-check: one commercial model is often built on several boards.
Before you flash
- The file is exactly 16 MB (128 Mbit) — the size of a full 128 Mbit SPI flash such as W25Q128, MX25L12835F, EN25QH128, GD25Q128. If the chip on your board has a different capacity, this is not a full dump for it.
BIOS compatibility checklist
0 / 6 checkedThis checklist cannot independently certify that a file is compatible with your board. It reflects what the catalogue knows about the file, not a verification of its content. How to identify the correct BIOS file